Niglon 40A 30mA Type A B Curve 6kA Bi-Directional RCBO – RCBO1-40/30SAX2

£17.33

Nationwide Delivery Trade Accounts Available Online Ordering

Niglon RCBO1-40/30SAX2 – 40A Bi-Directional RCBO

Compact switched line and neutral Type A RCBO combining residual-current and overcurrent protection.

  • 40A B Curve
  • 30mA Type A residual-current protection
  • 6kA breaking capacity
  • 240V AC
  • 1P+N switched line and neutral
  • Bi-directional space-saver design
  • BS EN 61009-1 / IEC 61009-2-2

Manufacturer part number: RCBO1-40/30SAX2.

Description

Niglon RCBO1-40/30SAX2 – 40A Bi-Directional Type A RCBO

The Niglon RCBO1-40/30SAX2 is a space-saving 40A B-curve, 30mA Type A RCBO designed to provide combined overload, short-circuit and residual-current protection. This bi-directional switched line and neutral device is rated at 6kA breaking capacity and is intended for use in suitably designed, compatible electrical distribution equipment.

Key Features

  • 40A B-curve overcurrent protection.
  • 30mA Type A residual-current protection.
  • 6kA breaking capacity.
  • Bi-directional operation.
  • 1P+N switched line and neutral configuration.
  • Compact space-saver construction.
  • Complies with BS EN 61009-1 and IEC 61009-2-2.

Technical Specifications

Manufacturer Niglon
Part number RCBO1-40/30SAX2
Product type Bi-directional RCBO
Rated current 40A
Tripping curve B Curve
Residual-current type Type A
Rated residual operating current 30mA
Breaking capacity 6kA
Rated voltage 240V AC
Poles 1P+N, switched line and neutral
Bi-directional Yes
Line terminal cable capacity 25mm²
Line / neutral cable capacity 10mm²
Terminal torque Line 2.5Nm; line/neutral 1.2Nm
Standards BS EN 61009-1; IEC 61009-2-2

Applications

Suitable for compatible consumer units and distribution assemblies where a 40A B-curve RCBO with 30mA Type A residual-current protection is specified. Bi-directional functionality may be relevant to suitably designed installations with alternative power-flow arrangements, subject to manufacturer guidance and circuit design.

Installation and Compatibility

Confirm busbar and enclosure compatibility with the manufacturer before ordering. Do not assume that protective devices from different ranges or manufacturers are interchangeable. The correct protective device must be selected, installed and tested by a competent electrician in accordance with the applicable UK wiring requirements.